8 800 100 09 35
Feedback
ул. Заовражная, 7а Нижний Новгород, 603107 Нижегородская область Россия
8 800 100 09 35
Mobile laboratory on KAMAZ 43502 chassis

Mobile laboratory on KAMAZ 43502 chassis

The catalog contains special equipment produced by the PROMAVTO factory.
You can specify the price of a ready-made solution that is most suitable for your purposes.

Description and equipment

Appointment of van: To transport personnel (up to 8 people) to places of research on the pipeline route, processing research results and developing images in the field at ambient temperatures from -50 ° C to + 50 ° C.
Complectation: C2-Расширенная
Production time: 2 months

Internal equipment:

  1. Drying cabinet for x-ray film
  1. Water system in the working compartment: washing, electric pump with a hydraulic accumulator, storage electric water heater, plastic piping system, 200 l stainless steel water tank, 200 l stainless steel water tank
  1. Electrical wiring with power distribution board, external input shield and sockets for 220 V and 24 V
  1. Photoflash
  1. A set of trench tools, mounted on the rear door
  1. Grounding pin with cable (2 pcs.)
  1. Operator's chair with mount for transport position
  2. Laboratory table with a place for a developing machine, material: plastic
  1. Cabinet for equipment storage, material: chipboard
  1. Cupboard for dishes(2 pcs),
    material: chipboard
  1. Work table with a stand and drawers, material: chipboard
  2. Kitchen table, material: chipboard
  1. Bunk sleeping shelf
    (the lower one is in the form of a locker, the upper one - folds down and acts as a back), upholstery material: leather substitute
  1. Folding table with the cabinet, material: laminated chipboard
  2. Wardrobe, material: metal
  1. Autonomous heater in the photo room
    Model: Webasto Air Top 2000 ST D,
    uel: diesel,
    heating capacity: 2 kW,
    fuel consumption: 0.12-0.24 l / h
  1. Household air conditioning
  1. Autonomous heater in the living compartment
    Model: Webasto Air Top Evo 3900,
    fuel: diesel,
    heating capacity: 3,5 kW,
    fuel consumption: 0.18-0.42 l / h
  1. A partition with a doorway, separating the living and working compartments
  1. A blank partition, separating the photo room and the working
  1. The partition to accommodate the generator

External equipment

  1. Tool box, made of steel
    of the gray color polymer powder- coated (2 pcs.)
  2. SWH (spare wheel holder)of the gray color polymer powder-coated on the rear wall of the van
  3. Hatch for access to the compartment under the generator
  1. Exhaust fan
  2. An access ladder, made of steel with a polymer powder coating of the gray color. In transport position it is mounted on the back of the van
  3. Flashing light нon the cab roof

Accessories

  • Dimensions of the van (LxWxH): 5500х2500х2100 mm;
  • The outer lining of the van: white clad metal 0.6 mm;
  • The inner lining of the van: white fiberglass reinforced plastic 4 mm on a plywood substrate;
  • Rear single-wing hinged door with an opening angle of 90 ° and fixation in the open position;
  • Windows in a plastic frame with a single automobile double-glazed window:
    • on the left side – sliding (2 pcs.);
    • on the right side – sliding;
  • Floor covering in a back compartment of a van: corrugated aluminum;
  • Color design: pasting of a van and a cabin according to the corporate style of the customer.

Our partners and clients